Operation Manual – NTP
Quidway S3100 Series Ethernet Switches Chapter 1
NTP Configuration
Huawei Technologies Proprietary
1-11
 Note:
The procedures for configuring NTP authentication on the server are the same as that
on the client. Besides, the client and the server must be configured with the same
authentication key.
1.5 Configuration of Optional NTP Parameters
Optional NTP parameters are:
z The local VLAN interface that sends NTP packets
z The number of the dynamic sessions that can be established locally
z Disabling the VLAN interface configured on a switch from receiving NTP packets
Table 1-6 Configure optional NTP parameters
Operation Command Description
Enter system view
system-view
—
Configure the local
interface that
sends NTP
packets
ntp-service
source-interface
Vlan-interface
Optional
Configure the
number of the
sessions that can
be established
locally
ntp-service
max-dynamic-sessions
number
Optional
By default, up to 100 dynamic
sessions can be established
locally.
Enter VLAN
interface view
interface Vlan-interface
vlan-id
—
Disable the
interface from
receiving NTP
packets
ntp-service in-interface
disable
Optional
By default, a VLAN interface
receives NTP packets.
To Next Page
Loading...
Need help?
General