Huawei Quidway S3100 Series User Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches Chapter 1
Stack
Huawei Technologies Proprietary
1-4
Table 1-3 Quit slave switch view
Operation Command Description
Quit slave switch
view
quit
You can quit slave switch view
only by executing this command
in user view of a slave switch.
1.3 Slave Switch Configuration
Just make sure the slave switch is connected to the main switch through the stack ports.
No configuration is needed.
1.4 Displaying and Debugging a Stack
Use the display command to display the information about a stack. The display
command can be executed in any view.
Table 1-4 Display and maintain stack configurations
Operation Command Description
Display the stack
status information
on the main switch
display stacking
[ members ]
Optional
The display command can be
executed in any view.
When being executed with the
members keyword not specified,
this command displays the main
switch and the number of switches
in the stack.
When being executed with the
members keyword specified, this
command displays the member
information of the stack, including
stack number , device name, MAC
addresses and status of the main
switch/slave switches.
Display the stack
status information
on a slave switch
display stacking
Optional
The display command can be
executed in any view.
The displayed information indicates
that the local switch is a slave
switch. The information such as
stack number of the local switch,
and the MAC address of the main
switch in the stack is also displayed.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English