Huawei Quidway S3100 Series User Manual

Operation Manual – VLAN
Quidway S3100 Series Ethernet Switches Chapter 1
VLAN Configuration
Huawei Technologies Proprietary
1-3
1.2.2 Creating VLANs in Batches
Table 1-2 Create VLANs in batches
Operation Command Description
Enter system view
system-view
—
Create multiple
specified VLANs
vlan { vlan-id1 to vlan-id2 |
all }
Optional
1.2.3 Configuring a Port-Based VLAN
I. Configuration prerequisites
Before configuring a port-based VLAN, you need to create it first.
II. Configuration procedure
Table 1-3 Configure a port-based VLAN
Operation Command Description
Enter system view
system-view
—
Create a VLAN
and enter VLAN
view
vlan vlan-id
Required
The vlan-id argument ranges
from 1 to 4,094.
Add specified
Ethernet ports to
the VLAN
port interface-list
Required
By default, all the ports belong
to the default VLAN.
Caution:
The configuration listed in Table 1-3 is only applicable to access ports. To add trunk
ports and hybrid ports to a VLAN, you can use the port trunk permit vlan and port
hybrid vlan commands in Ethernet port view. Refer to the Port Operation section in
Quidway S3100 Series Ethernet Switch Operation Manual for more.
1.3 Displaying a VLAN
After the above configuration, you can execute the display command in any view to
view the running of the VLAN configuration, and to verify the effect of the configuration.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English