Huawei Quidway S3100 Series User Manual

Operation Manual – Port
Quidway S3100 Series Ethernet Switches Chapter 1
Basic Port Configuration
Huawei Technologies Proprietary
1-6
Operation Command Remarks
Enable flow control on the
Ethernet port
flow-control
By default, flow
control is not enabled
on the port.
1.2.4 Configuring Access Port Attribute
Table 1-6 Configure access port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Configure the link type
for the port as access
port link-type access
By default, the link
type for the port is
access.
Add the current access
port into the specified
VLAN
port access vlan vlan-id
Optional
1.2.5 Configuring Hybrid Port Attribute
Table 1-7 Configure hybrid port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Set the link type for
the port as hybrid
port link-type hybrid
Required
Set the default VLAN
ID for the hybrid port
port hybrid pvid vlan vlan-id
Optional
By default, the VLAN of
a hybrid port is VLAN 1.
Add the current hybrid
port into the specified
VLAN
port hybrid vlan vlan-id-list
{ tagged | untagged }
Optional
For a hybrid port, you
can configure to tag the
packets of specific
VLANs, based on which
the packets of those
VLANs can be
processed in differently
ways.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English