Huawei Quidway S3100 Series User Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches Chapter 1
AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-24
Operation Command Description
Set the status of
the primary
RADIUS
authentication/aut
horization server
state primary authentication
{ block | active }
Set the status of
the primary
RADIUS
accounting server
state primary accounting { block |
active }
Set the status of
the secondary
RADIUS
authentication/aut
horization server
state secondary authentication
{ block | active }
Set the status of
the secondary
RADIUS
accounting server
state secondary accounting
{ block | active }
Optional
By default, all the
RADIUS servers in a
user-defined RADIUS
scheme are in the
active state; and the
RADIUS servers in
the default RADIUS
scheme "system" are
in the block state.
1.5.8 Configuring the Attributes for Data to be Sent to RADIUS Servers
Table 1-18 Configure the attributes for data to be sent to the RADIUS servers
Operation Command Description
Enter system
view
system-view —
Create a
RADIUS
scheme and
enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Set the format
of the user
names to be
sent to
RADIUS
servers
user-name-format
{ with-domain |
without-domain }
Optional
By default, the user names
sent from the switch to
RADIUS servers carry ISP
domain names.
Set the units of
measure for
data flows sent
to RADIUS
servers
data-flow-format data { byte |
giga-byte | kilo-byte |
mega-byte } packet
{ giga-packet | kilo-packet |
mega- packet | one-packet }
Optional
By default, in a RADIIUS
scheme, the unit of measure
for data is byte and that for
packets is one-packet.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English