Huawei Quidway S3100 Series User Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches Chapter 1
Information Cente
r
Huawei Technologies Proprietary
1-10
1.2.5 Enabling Information Output to the Log Buffer
Table 1-10 lists the related configurations on the switch.
Table 1-10 Enable information output to the log buffer
Operation Command Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the log
buffer
info-center logbuffer
[ channel { channel-number
| channel-name } | size
buffersize ]
Optional
By default, the switch outputs
information to the log buffer,
which can holds up to 512
items by default.
Define an
information source
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap
| debug } * { level severity |
state state } * ]
Required
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
This is to set the time stamp
format for log/debug/trap
information output.
This determines how the time
stamp is presented to users.
 Note:
To view debug information of specific modules, you need to set the information type as
debug in the info-center source command, and enable debugging on corresponding
modules with the debugging command as well.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English