Operation Manual – GVRP
Quidway S3100 Series Ethernet Switches Chapter 1
GVRP Configuration
Huawei Technologies Proprietary
1-3
them by their destination MAC addresses and delivers them to different GARP
application (for example, GVRP) for further processing.
1.1.2 GVRP Packet Format
The GVRP packets are in the following format:
Figure 1-1 Format of GVRP packets
The following table describes the packet fields in the above figure.
Table 1-1 Description of the packet fields
Field Description Value
Protocol ID Protocol ID 1
Message
Each message consists of two
parts: Attribute Type and
Attribute List.
—
Attribute Type
It is defined by specific GARP
application.
The attribute type of GVRP is
0x01.
Attribute List It contains multiple attributes. —
Attribute
Each general attribute consists
of three parts: Attribute Length,
Attribute Event and Attribute
Value.
Each LeaveAll attribute consists
of two parts: Attribute Length
and LeaveAll Event.
—
Attribute
Length
The length of the attribute 2 to 255