Huawei Quidway S3100 Series User Manual

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches Chapter 1
MSTP Configuration
Huawei Technologies Proprietary
1-31
I. Performing the mCheck operation in system view
Table 1-27 Perform the mCheck operation in system view
Operation Command Description
Enter system view
system-view
—
Perform the
mCheck operation
stp [ interface interface-list ]
mcheck
Required
II. Performing the mCheck operation in Ethernet port view
Table 1-28 Perform the mCheck operation in Ethernet port view
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Perform the
mCheck operation
stp mcheck
Required
Caution:
The stp mcheck command takes effect only when the switch operate in MSTP mode,
and does not take effect when the switch operates in STP/RSTP mode.)
1.4.3 Configuration Example
# Perform the mCheck operation on Ethernet1/0/1 port (assuming that the switch
operates in MSTP mode and the port operates in the STP/RSTP mode).
z Configure in system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp interface ethernet1/0/1 mcheck
z Configure in Ethernet port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp mcheck

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English