Huawei Quidway S3100 Series User Manual

Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches
Chapter 2 Basic System Configuration
& Debugging
Huawei Technologies Proprietary
2-1
Chapter 2 Basic System Configuration &
Debugging
2.1 Basic System Configuration
The following sections describe the basic system configuration and management
tasks:
z Setting the System Name of the Switch
z Setting the Date and Time
z Setting the Local Time Zone
z Setting the Summer Time
z Setting the CLI Language Mode
z Returning from Current View to Lower Level View
z Returning from Current View to User View
z Entering System View from User View
2.1.1 Setting the System Name of the Switch
Table 2-1 Set the system name of the switch
Operation Command Description
Enter system view
system-view
—
Set the system
name of the switch
sysname sysname
Optional
By default, the name
is Quidway.
2.1.2 Setting the Date and Time of the System
Perform the following configuration in user view.
Table 2-2 Set the date and time of the system
Operation Command Description
Set the current date
and time of the
system
clock datetime HH:MM:SS
YYYY/MM/DD
Optional
By default, it is
23:55:00 04/01/2000
when the system
starts up.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English