Huawei Quidway S3100 Series User Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches Chapter 1
AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-16
Operation Command Description
Set a password for the
specified user
password { simple |
cipher } password
Optional
Set the password display
mode of all local users
local-user
password-display-m
ode { cipher-force |
auto }
Optional
By default, the password
display mode of all access
users is auto, indicating the
passwords of access users
are displayed in the modes
set with the password
command.
Set the state of the
specified user
state { active | block }
Optional
By default, the local users
are in the active state once
they are created, that is,
they are allowed to request
network services.
Authorize the user to
access the specified
type(s) of service(s)
service-type { ftp |
lan-access | { telnet |
ssh | terminal }*
[ level level ] }
Required
By default, the system does
not authorize the user to
access any service.
Set the priority level of the
user
level level
Optional
By default, the priority level
of the user is 0.
Set the attributes of the
user whose service type is
lan-access
attribute { ip
ip-address | mac
mac-address | idle-cut
second | access-limit
max-user-number |
vlan vlan-id | location
{ nas-ip ip-address
port port-number |
port port-number } }*
Optional
If the user is bound to a
remote port, you must
specify the nas-ip
parameter (the following
ip-address is 127.0.0.1 by
default, representing this
device). If the user is bound
to a local port, you do not
need to specify the nas-ip
parameter.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English