Operation Manual – Login
Quidway S3100 Series Ethernet Switches Chapter 4 Logging in Using Modem
Huawei Technologies Proprietary
4-5
Figure 4-3 Call the modem
Step 5: Provide the password when prompted. If the password is correct, the prompt
(such as <Quidway>) appears. You can then configure or manage the switch. You can
also enter the character ? at anytime for help. Refer to the following chapters for
information about the configuration commands.
 Note:
If you perform no AUX user-related configuration on the switch, the commands of level
3 are available to modem users. Refer to the CLI Overview module for information
about command level.
To Next Page
Loading...
Need help?
General