Juniper EX9214 Hardware Guide

messages, while also enabling the Link Layer Discovery Protocol (LLDP) protocol, the Rapid Spanning
Tree Protocol (RSTP), Internet Group Management Protocol (IGMP) snooping, and storm control.
When you commit changes to the conguraon, a new conguraon le is created that becomes the
acve conguraon. You can always revert to the factory default conguraon. See Reverng to the
Default Factory Conguraon for the EX Series Switch .
This topic shows the factory default conguraon le of an EX9200 switch.
system {
arp {
aging-timer 5;
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
protocols {
lldp {
interface all;
}
}
Connecng and Conguring an EX9200 Switch (CLI Procedure)
The EX9200 switch is shipped with the Junos OS preinstalled and ready to be congured when the
switch is powered on. There are three copies of the soware: one on a CompactFlash card in the
Roung Engine module (RE module), one on a rotang hard disk in the RE module, and one on a USB
ash drive that can be inserted into the slot in the faceplate of the RE module.
195

Juniper EX9214 Specifications

General

Brand	Juniper
Model	EX9214
Category	Switch
Language	English