• Some parts of the chassis, including AC and DC power supply surfaces, power supply unit handles,
SFB card handles, and fan tray handles might become hot. The following label provides the warning
for hot surfaces on the chassis:
• Always ensure that all modules, power supplies, and cover panels are fully inserted and that the
installaon screws are fully ghtened.
Denions of Safety Warning Levels
The documentaon uses the following levels of safety warnings (there are two
Warning
formats):
NOTE: You might nd this informaon helpful in a parcular situaon, or you might overlook this
important informaon if it was not highlighted in a Note.
CAUTION: You need to observe the specied guidelines to prevent minor injury or
discomfort to you or severe damage to the device.
Aenon Veillez à respecter les consignes indiquées pour éviter toute incommodité ou
blessure légère, voire des dégâts graves pour l’appareil.
LASER WARNING: This symbol alerts you to the risk of personal injury from a laser.
Averssement Ce symbole signale un risque de blessure provoquée par rayon laser.
WARNING: This symbol means danger. You are in a situaon that could cause bodily
injury. Before you work on any equipment, be aware of the hazards involved with
electrical circuitry, and familiarize yourself with standard pracces for prevenng
accidents.
333
To Next Page
Loading...
Need help?
General
