EX9200-SF3 Unsupported Funcons and Capabilies from Legacy Switch Fabric
Modules
• The EX9200-SF3 does not support the external UTI/DTI interface (front panel LED and daughter
card interface).
• The EX9200-SF3 does not interoperate with any previous generaon SF modules (EX9200-SF and
EX9200-SF2). Smooth upgrade is not supported.
• The EX9200-SF3 does not support BITS.
• The EX9200-SF3 does not support DPCs.
• The EX9200-SF3 does not support mixed mode (DPC + MPC).
• The EX9200-SF3 does not support the JAM release.
SEE ALSO
Upgrading to an EX9200-SF3
Installing an SF Module in an EX9200 Switch
Removing an SF Module from an EX9200 Switch
Taking the Host Subsystem Oine in an EX9200 Switch
EX9200 Line Cards
IN THIS SECTION
Line Card Model and Version Compability in an EX9200 Switch | 81
EX9200-2C-8XS Line Card | 84
EX9200-4QS Line Card | 86
EX9200-6QS Line Card | 87
EX9200-MPC Line Card | 90
EX9200-12QS Line Card | 94
EX9200-15C Line Card | 96
80
To Next Page
Loading...
Need help?
General
