Juniper EX9214 Hardware Guide

Figure 6: Rear View of an EX9214 Switch with DC Power Supplies
You can mount an EX9214 switch on a standard 19-in. four-post rack or a standard 800-mm enclosed
cabinet. You can mount up to three EX9214 switches in a standard 48 rack unit (U) rack.
Field-Replaceable Units in an EX9200 Switch
Field-replaceable units (FRUs) are switch components that you can replace at your site. The EX9200
switch uses the following types of FRUs:
• Hot-insertable and hot-removable—You can remove and replace these components without powering
o the switch or disrupng the switching funcon.
• Hot-pluggable—You can remove and replace these components without powering o the switch, but
the switching funcon is interrupted unl you replace the component.
Table 6 on page 26 lists the FRUs for the EX9200 switch and their types.
25

Juniper EX9214 Specifications

General

Brand	Juniper
Model	EX9214
Category	Switch
Language	English