Parameter Name / value range / [default seng] Info
0x2441:007 WLAN sengs: WLAN SSID
["i5"]
•
From version 02.00
Name (Service Set Idener, SSID) of the WLAN network.
•
The preset name consists of the device name (iXXX) and the rst 10
digits of the serial number.
•
Example: "i550_0123456789"
•
The serial number is displayed in 0x2000:002 (P190.02).
0x2441:008 WLAN sengs: WLAN password
["password"]
•
From version 02.00
Password (WLAN network key) of the WLAN network.
•
This password serves to secure the WLAN connecons.
•
The password must have a minimum length of 8 characters. Although
shorter passwords are accepted and saved, the WLAN module cannot
be operated with such a password.
•
The character "*" is not allowed.
Note!
If the WLAN module is to be plugged onto the inverter for a longer
period of me, it is important to select a safe password. Otherwise, a
potenal aacker might connect to the WLAN access point and aack
the device and other connected devices or networks.
Currently (status: 2016), a WLAN is considered as safe if the password
•
consists of more than 20 characters,
•
contains capital and small leers, numbers and special characters and
•
cannot be found in any diconary.
0x2441:009 WLAN sengs: WLAN security
•
From version 02.00
Selecon of the WLAN encrypon.
0 WPA
1 WPA2
0x2441:010 WLAN sengs: WLAN access
•
From version 02.00
Switch on/o WLAN.
0 Disabled (WLAN o)
1 Enabled (WLAN on)
0x2441:011 WLAN sengs: WLAN channel
•
From version 02.00
Selecon of the WLAN channel.
1 Channel 1
2 Channel 2
3 Channel 3
4 Channel 4
5 Channel 5
6 Channel 6
7 Channel 7
8 Channel 8
9 Channel 9
10 Channel 10
11 Channel 11
0x2441:012 WLAN sengs: WLAN SSID broadcast
•
From version 02.00
1 = the name of the WLAN network, called SSID, is not visible for other
WLAN devices.
0 Acvated
1 Deacvated
0x2442:004 Acve WLAN sengs: Acve module mode
•
Read only
•
From version 02.00
Display of the acve data source for the WLAN sengs.
•
This parameter indicates whether the sengs used come from the
inverter or from the WLAN module.
0 Inverter The WLAN sengs saved in the inverter are used.
1 Standalone The WLAN sengs saved in the WLAN module are used.
0x2442:005 Acve WLAN sengs: MAC address
•
Read only
•
From version 02.00
Display of the MAC address of the WLAN module.
Addional funcons
Wireless LAN (WLAN)
WLAN basic sengs
428