Parameter Name / value range / [default seng] Info
0x2441:002 WLAN sengs: Netmask
0 ... [16777215] ... 4294967295
•
From version 02.00
Denion of the network mask for the WLAN access point.
•
In the client mode, a stac network mask can be set here for the
WLAN client. In order that the stac conguraon becomes eecve,
DHCP must be disabled in 0x2441:004.
•
Byte order is "Big-Endian":
255.255.255.0 ≡ 0x00FFFFFF (= 16777215)
0x2441:003 WLAN sengs: Gateway
0 ... [28485824] ... 4294967295
•
From version 02.00
Denion of the gateway for the WLAN access point.
•
In the client mode, a stac gateway can be set here for the WLAN cli-
ent. In order that the stac conguraon becomes eecve, DHCP
must be disabled in 0x2441:004.
•
Byte order is "Big-Endian":
192.168.178.1 ≡ 0x01B2A8C0 (= 28485824)
0x2442:001 Acve WLAN sengs: Acve IP address
•
Read only
•
From version 02.00
Display of the acve IP address.
•
If DHCP is acvated, the acve IP address usually derives from the
congured stac IP address of the device.
0x2442:002 Acve WLAN sengs: Acve netmask
•
Read only
•
From version 02.00
Display of the acve netmask.
0x2442:003 Acve WLAN sengs: Acve gateway
•
Read only
•
From version 02.00
Display of the acve gateway IP address.
0x2448:001 WLAN status: Connecon me
•
Read only
•
From version 02.00
Display of the connecon me in [s] since the current connecon was
established.
0x2448:002 WLAN status: Number of connecons
•
Read only
•
From version 02.00
In access point mode: Display of the number of currently connected cli-
ents.
In client mode: 0 ≡ not connected; 1 ≡ connected with external WLAN
network.
0x2448:003 WLAN status: Rx frame counter
•
Read only
•
From version 02.00
Display of the number of request received via WLAN.
0x2448:004 WLAN status: Error stascs
•
Read only
•
From version 02.00
Display of the quality of the WLAN connecon. A display value > 0 indi-
cates communicaon problemsn.
Addional funcons
Wireless LAN (WLAN)
WLAN client mode
436