Starting/stopping the engine – for driving
4.2 Starting the engine – at the outrigger control units
Operating manual 3 302 819 en 4 - 17
GMK3060
13.12.2018
4.2 Starting the engine – at the outrigger control units
H
You can generally start the engine only if a bridging plug is inserted in all sockets
not required;
à p. 14 - 43.
Prerequisites The following requirements must be met before you can start the engine from the
outrigger control units:
– The ignition in the driver's cab must be switched on.
– The ignition in the crane cab must be switched off.
–The lamp (1) lights up.
Starting the
engine
All activities and inspections required to start the engine must be carried out
before starting the engine;
à p. 4 - 1.
• Press the (1) button once – the engine starts.
To Next Page
Loading...
Need help?
General
