Driving with a rigged truck crane
13.5 Driving from the crane cab
Operating manual 3 302 819 en 13 - 13
GMK3060
13.12.2018
13.5 Driving from the crane cab
G
Risk of accidents when driving with a lifted load!
The truck crane may be driven with a lifted load only when it is in the Free on
wheels operating position and the current rigging mode has been entered and
confirmed on the RCL.
G
Risk of accidents due to the hook block/load swinging!
Secure the hook block/load when driving so that it cannot swing.
Start away slowly so that the hook block/load does not swing.
G
Risk of accidents due to partially obstructed view of the truck crane!
While driving, always stay in visual or radio contact with a banksman who can
observe the parts which you cannot see, such as the erected main boom.
G
Risk of overturning by slewing superstructure!
When driving the rigged truck crane, the slewing gear must be switched off –
slewing gear brake engaged. The turntable must be locked.
G
Risk of accidents when an increased idling speed is used!
If necessary, reset the idling speed to the default value. Do not drive with
increased idling speed. You may drive the truck crane from the crane cab only
at the lowest speed possible.
To Next Page
Loading...
Need help?
General
