Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
Operating manual 3 302 819 en 8 - 33
GMK3060
13.12.2018
8.5.4 Wheel change
•
If a puncture occurs while driving, stop the truck crane, taking the following
traffic into account, and secure the truck crane as outlined in the applicable
legal stipulations of the country in which you are working.
• Select as flat a place as possible to change the wheel.
• Apply the parking brake.
Removing a
damaged wheel
• Switch off the suspension; à p. 5 - 17.
• Raise the truck crane with the outriggers until the wheel to be changed just
barely leaves the ground.
• Remove the lug nuts (1) to (12) and remove the damaged wheel.
• Secure the wheel against falling over if you set it down temporarily.
s
G
Risk of accidents due to a wheel falling over!
If you temporarily lean a wheel against the truck crane while changing it, secure
it with a rope to prevent it falling over!
Move the outriggers only when no wheel is leaning against the truck crane.
G
Risk of accidents due to a wheel falling over!
When unscrewing the final lug nuts, the wheel can slip off the hub and fall toward
you. Secure the wheel and step back quickly if the wheel begins to tip.
To Next Page
Loading...
Need help?
General
