Driving with a rigged truck crane
13.5 Driving from the crane cab
13 - 28 3 302 819 en Operating manual
GMK3060
13.12.2018
13.5.7 After driving
•
Bring the truck crane to a halt with the brake pedal (1).
• Restore the original condition:
– Switch the transmission to neutral position (1)
– Switch off longitudinal differential lock (3)
– Switch off transverse differential locks (2)
– Switch on normal steering mode (4)
• Press the (7) button in at the bottom once.
The lamp (6) lights up, symbol (5) is red –
the parking brake is applied.
• If necessary, switch the engine off; à Switching off the engine, p. 10 - 10.
• Remove the ignition key from the ignition lock in the driver's cab and lock the
driver's cab to prevent unauthorised access.
Support the truck crane on outriggers if you do not intend to work in the
Free-on-wheels operating position.
To Next Page
Loading...
Need help?
General
