Crane operation
11.6 Settings and displays for crane operation
Operating manual 3 302 819 en 11 - 135
GMK3060
13.12.2018
11.6.8 Displaying the operating hours
You can view the total operating hours for all power units in the Operating hours
menu. You can also delete the recorded operating hours.
The total operating hours cannot be deleted.
• Open theOperating hours menu (1).
Displays
– The value (1) indicates the total operating
hours, for example, 1,680 hours.
– The value (2) shows the operating hours, which
can be reset.
Exception: The value below the symbol (3) indi-
cates how often the cycle Unlock telescopic section
has been operated, e.g. 13,750 times.
The value (4) shows the cycles; this can be reset.
Reset
The displayed operating hours/cycles (3) can be
reset.
• Select and confirm the symbols (1) one after
the other.
• Confirm the entry with the symbol (2).
You can select the power units
– individually – display (3) or
– select all – symbol (4).
• Reset the selected operating hours with
button (5) or (6).
To Next Page
Loading...
Need help?
General
