Manitowoc GROVE GMK3060 User Manual

Crane operation
11.4 Operation of the rated capacity limiter
11 - 44 3 302 819 en Operating manual
GMK3060
13.12.2018
Entering the RCL
code
You must enter the RCL code for the rigging mode according to the Lifting
capacity table.
• Refer to the Lifting capacity table for the current
rigging mode. The corresponding RCL code (1)
is specified at the bottom of the table
(e.g. 1100).
• Select and confirm the symbol (2).
• Select the necessary RCL code (3), e.g. 1100.
• Confirm the selection.
The other displays will show the corresponding
rigging mode.
11.4.3 Pre-selecting telescoping
• First enter the current rigging mode.
• Select and confirm the symbol (1).
The Pre-selection telescoping menu opens.
• Enter the desired parameter (2); à p. 9 - 46.
The table shows all permissible telescopings
(4) and the associated parameter (3) for the
entered rigging mode and entered parameter.
• Select and confirm the line with the desired
telescope status, for example, line (5).
The Enter rigging mode/telescope status menu
opens – the preselected telescope status (6) is
displayed.

Manitowoc GROVE GMK3060 Specifications

General

Brand	Manitowoc
Model	GROVE GMK3060
Category	Construction Equipment
Language	English