Driving mode
5.2 Operating the transmission
Operating manual 3 302 819 en 5 - 25
GMK3060
13.12.2018
5.2 Operating the transmission
The transmission automatically controls all gear changes. However, gears can be
changed manually at any time.
5.2.1 Switching on
The transmission is always in the neutral position when the ignition is
switched off.
• Shift to position N.
If you switch on the ignition in positions D or R, malfunctions may occur.
• Switch on the ignition.
The electronic gear system is switched on, and a warning buzzer sounds for
several seconds.
The electronic gear system conducts a check – CH entry.
When the check is completed, the entry N appears.
An error message appears if the electronic gear system detects an error;
à Error messages on the CCS display, p. 8 - 16.
To Next Page
Loading...
Need help?
General
