Starting/switching off the engine – for crane operation
10.4 Switching off the engine
10 - 12 3 302 819 en Operating manual
GMK3060
13.12.2018
10.4.3 Using the emergency stop switches
Four emergency stop switches are provided for
emergencies.
• Press an active emergency stop switch.
– The switch latches.
– The engine switches off.
If an air intake inhibitor is present, this is then
triggered.
Resetting the
emergency stop
switch
You can restart the engine only after you have reset the emergency stop switch.
• Switch off the ignition.
• Turn the actuated emergency stop switch until it disengages again.
If an air intake inhibitor is fitted, you must open it;
à Opening the air intake
inhibitor, p. 4 - 21.
G
Risk of overloading if used improperly!
Use the emergency stop switches only in an emergency, i.e. if the crane
functions no longer respond to the control levers.
Stopping crane movements suddenly may cause the truck crane to become
overloaded under unfavourable conditions.
1 At the carrier – always active
2 In the crane cab – always active
3 Only active for connected hand-held control
– in addition to (1) and (2)
To Next Page
Loading...
Need help?
General
