Rigging work
12.6 Rigging/unrigging the counterweight
12 - 60 3 302 819 en Operating manual
GMK3060
13.12.2018
12.6.7 Assembling counterweight versions – on the turntable
H
If more than 7.6 t (16,700 lbs) counterweight is mounted on the turntable then the
axle load when driving is greater than 12 t (26,500 lbs);
à Table for a maximum
axle load of 12 t (26,500 lbs), p. 6 - 3.
Version A
– 6.6 t (14,500 lbs),
Fixed on the turntable
– 7.6 t (16,700 lbs)
1.0 t section mounted on the turntable with
holders;
à p. 12 - 72.
– 8.6 t (18,900 lbs)
2.0 t section mounted on the turntable with
holders;
à p. 12 - 72.
G
Danger of overturning when slewing with a rigged counterweight!
You may only slew the superstructure with a rigged counterweight if an outrigger
span of sufficient size is rigged. Support the truck crane accordingly and confirm
the rigging mode at the RCL;
à Slewing with a rigged counterweight, p. 12 - 76.
This prevents the truck crane overturning when slewing.
To Next Page
Loading...
Need help?
General
