Driving with a rigged truck crane
13.5 Driving from the crane cab
Operating manual 3 302 819 en 13 - 15
GMK3060
13.12.2018
13.5.2 Opening/closing the Driving menu
Opening the menu
• Select and confirm the symbol (1).
The menu opens automatically the first time you release the parking brake after
switching on the ignition.
The display will show (A) or (B) depending on the
current slewing angle; Carrier display, p. 9 - 149.
If the symbol (1) is red, you must turn the ignition key in the driver's cab to
position 1 – the symbol then turns grey.
Selecting the
operating mode
The available operating modes are Crane operation and Driving.
Crane operation
Symbol (1) green – symbol (2) white
In this operating mode, you can perform crane operation in exactly the same way
as when the Driving menu is closed. This operating mode is selected when the
menu is opened.
Driving
Symbol (1) white – symbol (2) green
In this operating mode, the operating elements for driving are activated and you
can choose to drive with the crane's hydraulic system switched on. When the
crane's hydraulic system is switched on, the crane movements are released with
reduced power (no high-speed mode).
Selecting the operating mode
• Select and confirm the symbol (2) – the active operating mode is displayed.
s
To Next Page
Loading...
Need help?
General
