Crane operation
11.7 Working range limiter
Operating manual 3 302 819 en 11 - 139
GMK3060
13.12.2018
In the CCS
Start menu
The RCL shows the limited working range for the Slewing angle and Working radius
monitoring systems.
Display examples for switched-on Slewing angle
and Working radius monitoring systems.
11.7.2 Opening the working range limiter menu
• If necessary, open the overview of the
menu groups and select the corresponding
symbol (1) to (4).
The corresponding menu will open, and you can
enter limit values and switch the monitoring on
and off.
1 Permissible working range according to the
Lifting capacity table – shown darkened
2 Limited working range – shown lightened
1 For the overall height; Ã p. 11 - 140
2 For the working radius;
à p. 11 - 142
3 For the slewing range;
à p. 11 - 144.
4 For the hoist rope limiting;
à p. 11 - 147
To Next Page
Loading...
Need help?
General
