Starting/switching off the engine – for crane operation
10.2 Starting the engine – from the crane cab
Operating manual 3 302 819 en 10 - 7
GMK3060
13.12.2018
10.2.6 Display – setting the brightness
•
Open the Settings menu (1).
This is operated in the same way as in the driver's cab;
à p. 4 - 11.
10.2.7 Starting the engine
This section pertains to starting a warm and cold engine.
• Do not press the accelerator.
• Turn the ignition key to position 1.
• Press the button (1) in at the top.
• Let go of the button after the engine starts.
After starting, the idling speed corresponds to the standard value.
If the engine does not start, release the ignition key after about 15 seconds and
wait one minute before trying again.
If the engine does not start after several attempts;
à Engine malfunctions,
p. 8 - 19.
H
For setting the idling speed; Ã p. 10 - 9.
S
Danger of explosion when using starter fuel!
The engine may never be started with the aid of starter fuel. The starter fuel
sprayed into the intake manifold can ignite.
To Next Page
Loading...
Need help?
General
