Driving mode
5.2 Operating the transmission
5 - 36 3 302 819 en Operating manual
GMK3060
13.12.2018
5.2.10 On the roller type dynamometer
•
Always switch to neutral position after driving onto a roller type dynamometer.
5.2.11 Preheating the transmission
When the outside temperature is between -20 °C and -25 °C (-4 °F and -13 °F),
the gear oil must be preheated before you start driving the truck crane.
Let the engine run at idling speed for at least 10 minutes before you start driving.
G
Danger of unexpected moving off rollers!
Always shift to the neutral position on the roller type dynamometer.
In position D or R, a suitable gear is engaged for the speed. The engine braking
power is applied against the rollers and the truck crane can drive out of them.
To Next Page
Loading...
Need help?
General
