Operating elements for crane operation
9.2 Brief description of the operating elements
Operating manual 3 302 819 en 9 - 93
GMK3060
13.12.2018
9.2.7 Crane control CCS
The GMK3060 truck crane is equipped with the CCS crane control system. The
crane control system consists of a monitor and control unit in the driver's cab and
the crane cab. An additional control unit is located in the right control panel of the
crane cab.
CCS display
The start menu appears after switching on the
ignition (1).
After pressing a button on the jog dial or CCS
control panel, the overview of the menu
groups (2) appears.
A symbol is selected with the jog dial or the selec-
tion buttons on the CCS control panel to call up a
menu. A selected symbol is shown in red.
A menu is opened by pressing the jog dial or the
OK button on the control panel.
Menu control
Buttons for selecting, activating and confirming areas on the CCS display.
–Select
– Activate / confirm
The function of the buttons is different depending on the area.
There are three areas.
à In the Menu area, p. 9 - 94
à In the Input area, p. 9 - 94
à In the Operating area, p. 9 - 95
s
1Slewing or 2Press
– The selected range is marked.
1Press or 3Press
– The marked range is activated.
– The entry is confirmed.
To Next Page
Loading...
Need help?
General
