Rigging work
12.8 Other rigging work
12 - 112 3 302 819 en Operating manual
GMK3060
13.12.2018
12.8.3 Step at the crane cab
You can pull out the stair tread for crane operation.
For driving operation you must slide in the step.
Extending
• Pull the spring latch (3) and pull out the step (1)
by the handle (2) at the same time until the
spring latch (3) latches into place.
Retracting
Retracting is performed in the reverse sequence.
G
Risk of accidents by exceeding the permissible overall width
Always retract the step for on-road driving.
When the step is extended, the overall width specified for on-road driving is
exceeded.
G
Risk of accidents during on-road driving due to the step moving out
Always secure the retracted step using the spring latch.
This prevents the step from sliding out by itself during cornering.
To Next Page
Loading...
Need help?
General
