Driving mode
5.3 Driving and parking the truck crane
Operating manual 3 302 819 en 5 - 47
GMK3060
13.12.2018
After approx. 15 minutes of further operation the red lamp (3) also lights up – level
3 is active. The torque reduction can no longer be overridden and a currently
active override is switched off.
After 2 minutes the torque is slowly reduced further until the engine speed
reaches the idling speed.
• Stop at the next opportunity.
• Note the error messages; à Error messages on the CCS display, p. 8 - 16.
• Have the malfunction corrected.
When the malfunction has been corrected
• Start the engine – the lamp (1) goes out immediately.
• Actuate the accelerator or parking brake – the lamp (3) goes out immediately
and the lamp (2) then goes out approx. 10 minutes later.
To Next Page
Loading...
Need help?
General
