Driving mode
5.4 Off-road driving
Operating manual 3 302 819 en 5 - 61
GMK3060
13.12.2018
Viewing the
current inclination
The inclination indicator shows the current alignment.
Switching between measuring ranges
The measuring range is automatically switched between 1° and 5°.
(A) – When the truck crane is level the marking (1)
is in the middle.
(B) – In this example, the carrier would be
standing higher to the rear on the right hand side.
Exiting the menu You can exit theSuspension/Level adjustment system menu at any time.
• Press the button (1) once.
The start menu opens.
or
• Press the button (2) once.
The next highest menu is opened.
The Suspension/Level adjustment system menu automatically closes as soon as the
current speed rises above about 5 km/h (3 mph).
To Next Page
Loading...
Need help?
General
