Driving mode
5.6 Heating and air-conditioning system
Operating manual 3 302 819 en 5 - 73
GMK3060
13.12.2018
Cooling The illustration shows only a sample setting. Always adjust the setting to the
current conditions.
• Switch the air-conditioning system on – (4).
• Turn the switch (2) as far as it will go, to Cold.
• Turn switch (1) to the required level. With recir-
culating air,(5) you will be able to cool more
quickly, but no oxygen is fed in.
• Set the air distribution with switch (3) – open the
air vents if necessary;
à p. 5 - 70.
Drying You can dry the air in the driver's cab.
• Switch the air-conditioning system on – (4).
• Turn the switch (2) as far as it will go, to Warm.
• Turn the switch (1) to the desired level –
adjust the fresh air/air (5) setting to the
current conditions (humidity and temperature
of the outside air).
• Set the air distribution with switch (3) – open the
air vents if necessary;
à p. 5 - 70.
When drying, the air-conditioning system and the
heating system work against each other. After
drying, switch off the device that you do not
require.
To Next Page
Loading...
Need help?
General
