Crane operation
11.1 Before operating the crane
11 - 12 3 302 819 en Operating manual
GMK3060
13.12.2018
Emergency stop
switch
• Set down the load and let go of both control levers.
• Press the emergency stop switch (2) so that it
engages.
• Check whether the engine stops.
• Turn the emergency stop switch until it
disengages.
• Open the air intake inhibitor if required;
à Air intake inhibitor, p. 4 - 21.
• Repeat the checks with the emergency stop
switch (1) and, if the hand-held control is con-
nected, with the emergency stop switch (3).
If the emergency stop switch is not working correctly, do not start work with the
crane but notify
Manitowoc Crane Care.
To Next Page
Loading...
Need help?
General
