Crane operation
11.1 Before operating the crane
Operating manual 3 302 819 en 11 - 21
GMK3060
13.12.2018
Switching on the houselock
• Select the symbol (5).
• Press the button until the symbol (4) is
displayed – Houselock switched on.
The display first shows the symbol (1), then (2)
and then shows the symbol (4) when the house-
lock is switched on.
If the symbol (3) is displayed:
• Let go of the button.
The lock is blocked and you need to correct the
position of the superstructure as follows.
• Select the symbol (6).
• Press the button until the symbol (1) is
displayed – Houselock switched off.
• Apply the slewing gear brake.
• Switch on the slewing gear and slew the
superstructure a little further (minimally).
• Switch off the slewing gear.
• Select the symbol (5).
• Press the button until the symbol (4) is
displayed – Houselock switched on.
• If symbol (3) is still shown, you must again
correct the position of the superstructure.
s
S
Risk of damage due to slewing with blocked lock!
Before slewing ensure that the houselock is switched off. Otherwise the system
will be damaged during slewing.
To Next Page
Loading...
Need help?
General
