Crane operation
11.4 Operation of the rated capacity limiter
Operating manual 3 302 819 en 11 - 73
GMK3060
13.12.2018
Display the data You need the CraneEvaluation program in order to display the exported data. The
installation program is located in the CraneEvaluation folder on the Owner's USB
stick supplied.
Import data
• Start the CraneEvaluation program.
• Drag the file xxx.mcd onto the symbol (2) or
open the file via a command (1).
An Import window with various settings is
displayed.
• Confirm the selection via the symbol (6) – the
display (5) shows the import progress.
A graphical selection window opens.
If you do not wish to select a graph, you can simply close the window –
symbol (1);
à Displaying tables, p. 11 - 75.
s
1 Import – the data is imported for display in
the program.
2 Convert – the data is saved in a log file that
can be opened for example, with Excel.
3 Select columns – with the default setting, all
available data is imported. The menu allows
individual selection.
4 Output File – Storage location for the log file
GMKXXXX_XXXX_XXXX_XXXXXXX_XXXXXXX.mcd
XXX_XXXX_XXXXX_XXXXXXXX_XXXXXXXXX.log
To Next Page
Loading...
Need help?
General
