Overview
1.10 Identification
Operating manual 3 302 819 en 1 - 33
GMK3060
13.12.2018
The following plates and numbers are attached to the truck crane for identification
purposes:
The location of the identification numbers on removable rigging parts (for exam-
ple, counterweights, lattice extension) is described in the corresponding chapters
or in the relevant operating manual provided.
1 Serial number and crane type
2 the CE mark, which is only applicable for truck cranes whose equipment
and configuration complies with the guidelines and standards specified in
the supplied EC Declaration of Conformity.
3 Driver's cab serial number (at the strut of the door access)
4 Chassis number and crane type (at the passenger's seat)
5 Chassis number (front of the first axle line in the frame)
To Next Page
Loading...
Need help?
General
