Rigging work
12.6 Rigging/unrigging the counterweight
Operating manual 3 302 819 en 12 - 73
GMK3060
13.12.2018
Installing • Assemble the 13,6 t (29,900 lbs) counterweight combination on the counter-
weight platform so that the required counterweight sections are positioned
on top.
à Version A, p. 12 - 64, à Version B, p. 12 - 66.
Raise the counterweight onto the turntable and pre-tension it;
à p. 12 - 70.
• Suspend the bracket (3) in the plate (4) from
below.
• Fold the locking bar (2) up, behind the slinging
point (5).
• Tighten the nuts (1) only enough so that the
bracket is at the slinging point and has no
more play.
• Secure the nuts in with the counternuts (1).
• Secure the clamp on the other side in the
same way.
• Lower the counterweight onto the counter-
weight platform.
• Enter the current rigging mode on the RCL.
To Next Page
Loading...
Need help?
General
