122
Dialing Options At the MAIN MENU, press F4, F3, F4 and then F9 to access this screen.
This screen allows you to modify DTMF phone-wide parameters such
as timing and phone dial operation. Each Conventional system uses
one of these parameter sets which are selected in the Auto Access Code
field on the CONVENTIONAL PERSONALITY screen (F4/F6/F3).
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, press the UP/DOWN arrow keys to
select the desired choice or value.
Field Definitions
Phone Dialing Use the UP/DOWN arrow keys to select the type of Dialing operation
from among the following:
DTMF Digit Hangtime (ms) Use the UP/DOWN arrows to specify the amount of time the radio
continues transmitting after completion of a DTMF digit transmission.
Valid selections are 25 to 6375 ms in 25-ms increments.
The default is 1 second (1000 ms).
DTMF Pause Time (ms) Use the UP/DOWN arrows to select the length of time that the carrier
is transmitted before the radio begins to transmit DTMF digits. Valid
selections are 500 to 4000 ms in 500-ms increments.
The default is 1000 ms (1 second).
DCDI
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:PHONE:DTMF
DIALING OPTIONS
---------------
Phone Dialing. Delayed Buffered DTMF Pause Time (ms)........1000
DTMF Digit Hangtime (ms)....1000
Num Initial Delay Digit Duration Interdigit Delay
(ms) (ms) (ms)
--- ------------- -------------- ----------------
1 1000 125 75
2 250 150 100
3 350 125 75
4 350 125 75
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
Immediate Live Automatically connects the radio to the system when entering
phone mode (live dial).
Immediate Buffered Automatically connects the radio to the system when entering
phone mode (buffered dial).
Delayed Buffered Automatically connects the radio to the system when PTT is
pressed (buffered dial). Allows the user to enter the phone
number in the radio and then transmit the phone number after
pressing PTT.