165
Trunking Message
Alias
From the MAIN MENU, press F4 twice, F3, F9 and then F7 to access
this screen.
This screen can be accessed only if a radio containing the SMARTNET or
SmartZone software option (or a corresponding codeplug) has been read and
the Message Alias field on the TRUNKING SYSTEM OPTIONS screen (F4/
F4/F3/F9) is set to Enabled. This screen pertains to the Trunking
Message Alias List.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F2 - ADD ITEM Adds a Trunking Message Alias item.
F5 - DELETE ITEM Deletes a Trunking Message Alias item. You will be prompted before
the item is actually deleted.
Field Definitions
Message Alias Number Use the UP/DOWN arrows to make your selection. This field indicates
the position number for the Message Alias Text Field. The valid range
of values is 1 to 16.
Message Alias Text Enter the ASCII text that must be displayed when the corresponding
message number is selected.
DDCIG
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
MCS Model:
...SYSTEM:OPTIONS:MESSAGE ALIAS
TRUNKING MESSAGE ALIAS
----------------------
Num Message Alias Number Message Alias Text
--- -------------------- ------------------
1 1 MESSAGE 1
2 2 MESSAGE 2
3 3 MESSAGE 3
4 4 MESSAGE 4
5 5 MESSAGE 5
6 6 MESSAGE 6
7 7 MESSAGE 7
8 8 MESSAGE 8
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
To Next Page
Loading...
Need help?
General