242
Single Tone List From the MAIN MENU, press F4, F6, F7 and then F3 to access this
screen.
This screen pertains to the Single Tone list. Press Tab to select the
desired field, or press the desired function key (F1 - F10). If a field is
highlighted, use the UP/DOWN arrow keys to select the desired choice
or value.
Function Key Descriptions
F2 - ADD TONE Adds a tone (Hz).
F5 - DELETE TONE Deletes the current tone. You will be prompted for confirmation before
the tone is actually deleted.
Field Definitions
Tone (Hz) Use the UP/DOWN arrow keys to select the desired tone frequency or
enter a value directly. The defined tones can be used on a personality-
by-personality basis in the CONV PERS RAC OPTIONS screen (F4/F6/
F3/F9/F7) by setting the Repeater Access field to Enabled. The field
“Single Tone (Hz)” should contain a tone from this list. The valid range
of values is 300 to 3000 Hz in 0.1-Hz increments.
The default is 300 Hz.
DFGC
MOTOROLA Radio Service Software Enter or Scroll to Select Frequency.
MCS Model:
...CONV:AUX:SINGLETONE LIST
SINGLETONE LIST
---------------
# Tone (Hz) # Tone (Hz)
- --------- - ---------
1 300.0
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
TONE TONE
To Next Page
Loading...
Need help?
General