164
Trunking Status
Alias
From the MAIN MENU, press F4 twice, F3, F9 and then F6 to access
this screen.
This screen can be accessed only if a radio containing the SMARTNET or
SmartZone software option (or a corresponding codeplug) has been read and
the Status Alias field on the TRUNKING SYSTEM OPTIONS screen (F4/F4/
F3/F9) is set to Enabled. This screen pertains to the Trunking Status
Alias List.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F2 - ADD ITEM Adds a Trunking Status Alias item.
F5 - DELETE ITEM Deletes the current Trunking Status Alias item. You will be prompted
before the item is actually deleted.
Field Definitions
Status Alias Number Use the UP/DOWN arrows to make your selection. This field indicates
the position number for the Status Alias Text field. The valid range of
values is 1 to 8 for Trunking.
Status Alias Text Enter the ASCII text that must be displayed when the corresponding
status number is selected.
DDCIF
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
MCS Model:
...SYSTEM:OPTIONS:STATUS ALIAS
TRUNKING STATUS ALIAS
---------------------
Num Status Alias Number Status Alias Text
--- ------------------- -----------------
1 1 STATUS 1
2 2 STATUS 2
3 3 STATUS 3
4 4 STATUS 4
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
To Next Page
Loading...
Need help?
General