198
Conventional Menu From the MAIN MENU, press F4 and then F6 to access this screen.
This screen allows you to navigate to the Conventional edit screens.
The options in these menus pertain only to Conventional radio features.
Function Key Descriptions
F2 - CONV WIDE OPT
(Conventional Radio Wide
Options)
Applicable to all Conventional channels and includes options such as
monitor type.
F3 - CONV PERS
(Conventional Personality)
This screen is used to define Conventional frequencies, coded squelch
type (PL/DPL), and Conventional options (scan, etc.) permitted on
each channel.
F4 - MDC CONFIG
(MDC Configuration)
This function will be visible only when a radio with MDC capabilities has
been read. Not all radios have this capability. This screen is used to define
the MDC signalling configuration for each Conventional personality.
Each system can be defined with a unique PTT-ID, emergency
operation and signalling timing options.
F7 - AUX SYSTEM
(Auxiliary System)
Takes you to a screen where you can define SingleTone system
information, SingleTone Lists, Quick-Call II system information, and
GE Star system information.
F8 - MSG ALIAS
(Message Alias)
This option will be visible only when the Message Alias field is set to
Enabled. Brings up a screen where you can change and view the
parameters associated with the MDC System Message Alias.
F9 - STATUS ALIAS This option will be visible only when the Status Alias field is set to Enabled.
Brings up a screen where you can change and view the parameters
associated with the MDC System Status Alias.
DF
MOTOROLA Radio Service Software Select Function F1 - F10.
MCS Model:
MAIN:CHANGE/VIEW:CONV
CONVENTIONAL MENU
-----------------
F1 - HELP
F2 - Conventional Radio Wide Configuration
F3 - Conventional Personalities, Options
F4 - MDC Systems, Options, Call List
F5 -
F6 -
F7 - Auxiliary Systems
F8 - Conventional Message Alias List
F9 - Conventional Status Alias List
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CONV CONV MDC AUX MSG STATUS EXIT
WIDE OPT PERS CONFIG SYSTEM ALIAS ALIAS
To Next Page
Loading...
Need help?
General