72
Get/Save/Program
Menu
At the MAIN MENU, press F3 to bring up this screen.
GET/SAVE/PROGRAM functions are used to transfer codeplug data
from your radio or an archive file into your computer so that you can
change, view or print the data. These functions also permit you to
program modified data back into your radio and save a copy of the
codeplug data in an archive file.
Note: You CANNOT read, clone or program a CBI-initialized
radio from this menu. If you try to do so, you will receive a
message informing you that you must initialize the controller
board first. Bring up the CONTROLLER BOARD
INITIALIZATION screen (F2/F9) to initialize the radio.
C
MOTOROLA Radio Service Software Select Function F1 - F10.
MCS Model:
MAIN:GET/SAVE/PROG
GET/SAVE/PROGRAM MENU
---------------------
F1 - HELP
F2 - Read Data from Radio Codeplug (Requires RIB)
F3 - Get Codeplug Data from Archive Disk File
F4 - Get TCMS Codeplug Update Disk File
F5 - Clone Radio
F6 -
F7 - Save Codeplug Data to Archive Disk File
F8 - Program Data into Radio Codeplug (Requires RIB)
F9 - Radio Programming History
F10 - Exit
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP READ GET CLONE SAVE PROGRAM VIEW EXIT
RADIO ARCHIVE RADIO ARCHIVE RADIO HISTORY
!
Caution
Do NOT turn off the radio or disconnect it from the
computer while attempting to program the codeplug.
Interrupting the programming process will destroy the
codeplug contents and completely DISABLE the radio!
To Next Page
Loading...
Need help?
General