186
Trunking
Personality Options
From the MAIN MENU, press F4 thrice and then F9 to access this
screen.
This screen is used to view and edit additional information for the
current Trunking personality. Press Tab to select the desired field, or
press the desired function key (F1 - F10). If a field is highlighted, use
the UP/DOWN arrow keys to select the desired choice or value.
Function Key Descriptions
F3 - PREV PERS Accesses the previous personality.
F4 - NEXT PERS Accesses the next personality.
F6 - PREF SITES (not shown) A system key or FTR key must be present and the Coverage Type field must
be set to SmartZone on the TRUNKING SYSTEM screen (F4/F4/F3) for this
function to be visible. This function accesses the SmartZone Preferred
Sites linked to the current personality.
F7 - VRM OPTIONS This function will be visible only if:
❒ The VRM500 Capable field on the RADIO WIDE OPTIONS screen
(F4/F3/F2) is set to Enabled; or
❒ The VRM100 field on the current screen (TRUNKING
PERSONALITY OPTIONS, F4/F4/F4/F9) is set to Enabled.
Brings up a screen where you can view and edit VRM100 or VRM500
options depending on whether the VRM100 Capable or VRM500
Capable field is set to Enabled on the RADIO WIDE OPTIONS screen.
DDDI
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
MAIN:CHANGE/VIEW:TRUNKING:PERS:OPT
Personality........1 TRUNKING PERSONALITY OPTIONS
----------------------------
Conversation Type................Message
Talk Permit Tone.................Enabled
VRM100.......................... Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PREV NEXT PREF VRM EXIT
PERS PERS SITES OPTIONS
To Next Page
Loading...
Need help?
General