203
Conventional
Personality
From the MAIN MENU, press F4, F6 and then F3 to access this screen.
This screen allows the user to edit information for Conventional
operation. Press Tab to select the desired field, or press the desired
function key (F1 - F10). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Function Key Descriptions
F2 - ADD PERS Adds a Conventional personality. A maximum of 10 Conventional
Personalities may be created. Each personality must be “connected” to
a channel on the ZONE/CHANNEL ASSIGNMENT screen (F4/F8).
F3 - PREV PERS Accesses the previous personality.
F4 - NEXT PERS Accesses the next personality.
F5 - DELETE PERS Removes the current personality. You will be prompted for
confirmation before the personality is deleted. A minimum of one
Conventional personality must be maintained.
Note: The only way to recover a deleted personality is to immediately
re-read the radio or the archive file. However, any other changes
that were made and not previously saved will still be lost.
F6 - SECURE OPTIONS (not
shown)
This function will be active only when a radio equipped with SECURE
hardware has been read. Accesses the SECURE parameters linked to this
personality.
F7 - MDC OPTIONS This function will be active only when a radio with MDC capabilities has
been read and the Signalling Type field is set to MDC. Allows access to
MDC parameters linked to this personality. Other system-wide MDC
parameters are located on the MDC SYSTEM screen (F4/F6/F4/F3).
DFC
MOTOROLA Radio Service Software Enter or Scroll to Select System.
MCS Model:
MAIN:CHANGE/VIEW:CONV:PERS
Personality........1 CONVENTIONAL PERSONALITY
------------------------
Receive Only..............Disabled Signalling....................MDC
Direct / Talkaround........Enabled MDC System #...................1
Time Out Timer..........3- 60 PTT ID..................Disabled
Scan List.....................None Emerg. PTT ID...........Disabled
Hot Keypad................Disabled Revert..........Selected Channel
Phone Operation..........Ünlimited Quik-Call II System #...Disabled
Receive Transmit Direct
Frequency (MHz) 136.06250 136.01250 136.06250
Squelch Type CSQ Disabled Disabled
Code
DPL Invert
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE SECURE MDC PHONE MORE EXIT
PERS PERS PERS PERS OPTIONS OPTIONS OPTIONS OPTIONS
To Next Page
Loading...
Need help?
General