63
Signalling
Alignment Menu
From the MAIN MENU, press F2 and then F4 to access this screen.
Standard periodic receiver alignment procedures are performed from
this menu. Signalling deviation should be checked any time the radio is
serviced and must be adjusted whenever any of the modulation circuitry has
been replaced.
Note: All radio compensation/deviation adjustments must be
made before adjusting signalling deviation.
Function Key Descriptions
F2 - F4 Refer to your Radio Service Manual for these alignment procedures.
BD
MOTOROLA Radio Service Software Select Function F1 - F10.
MCS Model:
...SERVICE:SIGNALLING ALIGNMENT MENU
SIGNALLING ALIGNMENT MENU
-------------------------
F1 - HELP
F2 - DTMF
F3 - High Speed
F4 - MDC 1200
F5 -
F6 -
F7 -
F8 -
F9 -
F10 - Exit, Return to Service Menu
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP DTMF HIGH MDC EXIT
ALIGN SPEED 1200
!
Caution
This procedure should be attempted only by qualified
service personnel. Failure to perform alignment
procedures properly may result in seriously degraded
radio or system performance.
To Next Page
Loading...
Need help?
General