61
SECURE Receive
Discriminator Level
From the MAIN MENU, press F2, F3 and then F8 to access this screen.
Refer to your Radio Service Manual for the SECURE Receive
Discriminator Level procedure.
Programming Procedure 1. Press Tab to select the desired field, or press the desired function
key.
2. If a field is selected, press the UP/DOWN arrow keys to select the
desired choice or value.
Function Key Description
F8 - PROGRAM VALUE Program the selected value into the radio.
Field Definition
New Softpot Value This softpot value determines the SECURE signal level at the
discriminator. The status bar shows the relationship between this
setting and the minimum and maximum settings.
BCH
MOTOROLA Radio Service Software Use UP/DOWN Arrows To Adjust Softpot.
MCS Model:
...SECURE RECEIVE DISCRIMINATOR LEVEL
SECURE RECEIVE DISCRIMINATOR LEVEL
----------------------------------
Frequency Current Value
--------- -------------
136.0625 81 New Softpot Value..... 81
0 127
MIN |----+----+----+----+----+----+----+--X-+----+----+----+----| MAX
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PROGRAM EXIT
VALUE
!
Caution
This procedure should be attempted only by qualified
service personnel. Failure to perform alignment
procedures properly may result in seriously degraded
radio or system performance.
To Next Page
Loading...
Need help?
General